Goodyear & IBT
|
When an application calls for hydraulic power, the right hydraulic hose is an important consideration. IBT recommends Goodyear's full line of hose products. They meet all major global hose standards.
Whether the application is construction, mining, agriculture, manufacturing or transportation, Goodyear has the right hydraulic hose to meet the diverse needs of IBT's customers.
|
Armorcoat™ Hose Cover |
-
Super tough cover for high abrasion applications.
-
Can replace protective sleeves.
-
Mine Safety and Health Administration (MSHA) rated.
-
CR2SN (SAE 100R2AT/2SN), AR12 (SAE 100R12/EN 856 R12), AR13 (SAE 100R13/EN 856 R13), AR15 (SAE 100R15), AR16SC (SAE 100R16/EN 857 2SC) and AR17 (SAE 100R17) hydraulic applications.
|
|
Arctic™ Low Temperature Hose |
-
-58° F low temperature service.
-
LR2SN (SAE 100R2AT) high pressure hydraulic applications.
|
|
Desert™ High Temperature Hose |
-
275° F high temperature service.
-
HR1SN (SAE 100R1AT/1SN), HR2SN (SAE 100R2AT/2SN), CR2SN (SAE 100R2AT/2SN), HR6 (SAE 100R6/EN 854 R6) hydraulic applications.
|
|
Non-Conductive Hose |
-
NSFX (Saflex) medium pressure hydraulic applications.
-
Thermoplastic Hose including GR7 (SAE 100R7/EN 855 R7), GR8 (SAE 100R8/EN 855 R8) and GR18 (SAE 100R18).
|
It is essential to know and observe proper operation and safe usage of Goodyear hoses and related equipment.
Inadequate attention to selection of the hose for your application can result in hose leakage, bursting, or other failure. This can cause serious bodily injury or property damage from spraying fluids or flying projectiles.
Factors involved in the selection of the proper hose include:
-
Hose Size
-
Hose Pressure
-
Bends
-
Hose Ends
-
Installation Design
|
-
Fluid Conveyed
-
Hose Length
-
Static Head Pressure
-
Temperature
|
And, of course, the fittings are critical too.
Goodyear fittings and threads offer you one source that has many selections.
Goodyear is the one-source supplier of a wide selection of high-performance hydraulic hose fittings, covering a wide range of designs, shapes, sizes and pressure ratings. Goodyear has low, medium and high-pressure fittings available for braided, spiral and thermoplastic hose.
Fittings include Ultra-Crimp™ (1-piece), Uni-Crimp™ (2-piece), Dual-Grip™ (2-piece) and Field-Grip™ (reattachable). Goodyear's line of twenty-one thread ends include SAE, NPTF, JIC, British Standard, DIN and JIS. End styles include straights, swivels, elbows and flanges. Find the fittings and threads you need, from one great source: IBT and Goodyear.
Fittings must be carefully and precisely crimped on the hose. Goodyear has you covered there too.
|
Bite-to-Wire
These one-piece crimp fittings provide maximum coupling retention on one and two braid hose as well as four and six spiral hose. Serrations penetrate the cover with a powerful bite into the wire reinforcement, resulting in even hose compression. |
-
No Skive - Assemblies made faster, with fewer steps and less mess.
-
Full Length Crimp - Maximum coupling retention for a safe and longer lasting assembly; easier to crimp with a lower profile.
-
Zinc Plating - Offers corrosion resistance for extended hose assembly
and fitting life, easily surpassing the corrosion resistance
of SAE ASTM B117.
|
|
High Pressure Spiral Hose Couplings |
-
Code 61 and Code 62 fittings for SAE 100R12 and 100R13.
-
Solid one-piece flanged fitting; no braze or weld joints.
|
|
Field-Grip Fittings |
-
Non-skive, non-mandrel for easy installation.
|
|
Hose and fittings meet global performance standards and are designed and manufactured to meet industry standards including SAE, DIN and JIS. |
