Spruce up your facility fast with Rust-Oleum’s high performance, easy maintenance flooring. The easy-to easy-to-use, fast-drying, roll and go floor sealers, paints and epoxies are the perfect solutions for customer, management, and OSHA “tour ready” facility floors.
|
Image courtesy of Rust-Oleum
|
Concrete Saver® 5500 System
Acrylic Dustproofer Floor Sealer
-
<100 g/l VOC
-
Ready-to-use formula applies direct to concrete, or as a clear acrylic topcoat for an easy to clean surface
-
Seals out water and mild chemicals, prevents dusting
-
Can be recoated in 3 hours
-
Fast return to service
-
Interior/exterior
-
Brush/roll/spray
1 Gallon: 200 sq. ft. first coat; 300 sq. ft. second coat
5 Gallon 1,000 sq. ft. first coat; 1,500 sq. ft. second coat |
|
Image courtesy of Rust-Oleum
|
Concrete Saver® 5600 System
Acrylic Urethane Floor Paint
-
<100 g/l VOC
-
Ready-to-use formula protects against water, staining and mildew
-
Excellent coverage over new and previously coated surfaces with minimal prep
-
Can be applied during regular work hours with little odor
-
Accepts next day traffic
-
Interior/exterior
-
Brush/roll/spray
1 Gallon: 170-270 sq. ft. at 1.5-2.0 mil DFT
5 Gallon: 850-1,350 sq. ft. at 1.5-2.0 mil DFT |
|
Image courtesy of Rust-Oleum
|
Concrete Saver® 6200 System
Fast-Cure Epoxy Floor Coating
-
<250 g/l VOC
-
Convenient, two-component easy-to-mix and apply floor coating kit for mild to moderate industrial environments
-
Excellent chemical and abrasion protection
-
Accepts light traffic in 5 hours
-
Brush/roller
1 Gallon Kit: 300-350 sq. ft. at 2.5-5.5 mil DFT |
Image courtesy of Rust-Oleum
|
Rust-Oleum also offers a complete line of solutions for anti-slip, green (zero VOC), heavy-duty, patch, repair and more. If you’re going green, ask for Sierra Performance S40. It’s the only Green Seal (GS-11) certified epoxy floor coating! Zero VOC, zero HAPs, and no solvent odor.
Contact your IBT Sales Rep or email the General Industrial group for more information.
